10
Getting started
Belt clip and optional headset
Belt Clip
Lift the plastic
cover.
Plug a 2.5mm headset into
the jack on the side of the
handset (beneath the small
plastic cover).
To remove the belt clip:
Gently lift either of the
belt clip tabs outwards to
remove the belt clip from
the handset.
To attach the belt clip:
Snap the belt clip into
the slots on both sides
of the handset.
Headset
For handsfree telephone conversation, you can use any industry standard
2.5mm headset (purchased separately). For best results, use an AT&T 2.5mm
headset. To purchase a headset, visit our website at
www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial
1 (866) 288-4268.
Side view of handset
To Next Page
Loading...
