Multiple Handset use
37
Conference Call
To initiate an intercom call while on a conference call:
When you initiate an intercom call during a conference call, it places all
participants in the conference call on hold.
1. Press INT on the handset (see To initiate an intercom call with a handset
on page 32).
-OR-
Select Intercom in the OPTION menu on the telephone base, then press
the SELECT soft key (see To initiate an intercom call from the telephone
base on page 32).
2. To reconnect to the conference call, press the END soft key, INT or
OFF/CANCEL on the handset to end the intercom call.
-OR-
Press the END soft key, CANCEL, /LINE 1 or /LINE 2 on the telephone
base to end the intercom call.
3. Press LINE 1/FLASH or LINE 2/FLASH on the handset or /LINE 1 or
/LINE 2 on the telephone base to reconnect to the conference call.
To end a conference call:
Press OFF/CANCEL on the handset or put the handset back in the
telephone base or charger.
-OR-
Press the OPTION soft key on the handset or telephone base. Then,
press qCID or pDIR on the handset or on the telephone base to select
End Conference.
-OR-
Press /LINE 1 or /LINE 2 on the telephone base.
•
•
•
To Next Page
Loading...
Need help?
General
