83
Appendix
Screen display messages
L1)ON HOLD
Line 1 is on hold.
L2)ON HOLD
Line 2 is on hold.
Line 1 Incoming call
There is an incoming call on line 1.
Line 2 Incoming call
There is an incoming call on line 2.
Microphone ON
MUTE is turned off and the person on the other end
can hear you.
Microphone off
You have turned off the handset microphone. The
other party cannot hear you but you can hear the
other party.
No signal, call ended
Communication between the system handset and
telephone base is lost during a call.
Not available at this time
One system handset or the telephone base is
already viewing the call log or directory and another
handset/telephone base attempts to review it.
Out of range OR
no power at base
The system handset cannot communicate with the
telephone base. Check the telephone base power
connection or move closer.
Paging all handsets
The telephone base is paging handset(s).
**Paging**
The system handset is paged.
Place handset in charger
The battery is very low. Place the system handset in
the telephone base for recharging.
Ringer muted
The ringer is muted temporarily during an incoming
call.
Saved
Your selection has been saved.
Unable to call try again
You try to make an intercom call but the system
handset/telephone base you are calling is in the
directory, in the call log, on an outside call, or the
system handset is out of range.
Unable to save
You try to save a caller ID entry with no name or
number.
To Next Page
Loading...
Need help?
General
