90
Appendix
Troubleshooting
System does not record messages.
• Make sure the answering system is on.
AnS1
ON
,
AnS
ON
2
or
AnS1
ON
2
should show on the
handset and the /ANSWER ON 1 and/or /ANSWER ON 2 light on the
telephone base should be on.
• Make sure the memory of the answering system is not full.
If you subscribe to voicemail service, change the number of rings so
that your answering system answers before your voicemail (page 65).
To determine how many rings activate your voicemail, contact your
telephone service provider.
If there is a fax machine connected to the same telephone line, try
disconnecting the fax machine. If that solves the problem, consult your
fax machine documentation for information on compatibility with
answering systems.
System announces, “Time and day not set.”
• You need to reset the system clock (page 15 or 21).
Outgoing announcement is not clear.
• When you record your announcement, make sure you speak in a normal
tone of voice, about nine inches from the handset or the telephone base.
• Make sure there is no background noise (TV, music, etc.) while recording.
An icon and a line number appear on the handset and telephone base
screen and I don’t know why.
•
Your telephone has voicemail indication that is separate from the built-in
answering system. If the
icon and a line number appear on the display,
your telephone has received a signal from your telephone service provider
that you have a voicemail message waiting for you to retrieve from them.
Contact your telephone service provider for more information on how to
access your voicemail.
I cannot retrieve voicemail messages.
•
Your telephone has both a built-in answering system and voicemail
indication. They are independent features and each alerts you to new
messages dierently (page 68). If you subscribe to voicemail service from
your telephone service provider, contact your telephone service provider
for more information on how to access your voicemail.
•
•
To Next Page
Loading...
Need help?
General
