Atari 520ST User Manual

Spend a
few moments to
read over
the
manuals, then
unpack the
monitor and
disk drive
carefully. Check to
make
sure that the
listed
parts of each package
are there.
You will notice
that each
box
contains the
following components:
Monitor or Disk
Drive
Power Cable
Interface
Cable
Manual
Warranty
Card
Until
you
have your system
completely set up,
it is
a good
idea to
keep
the
pieces for each
component separate to
avoid any possible
confusion
in the set-up
procedure.
HOOKING UP
THE
SYSTEM
Setting up
your ST
Computer System
is easy.
All
the
devices
simply
plug together.
All you need to
do
is plug
the connectors
into the
right places.
It
is
important that you
choose the
proper location
for your
ST
System. Set
up
your system
where it
won’t have to be
moved often
and
is
not subject to
intense heat or
moisture.
Your
ST System is
made up
of sophisticated pieces
of
electronic
equipment. Anywhere
you
would
set up
your stereo system
or your
television is suitable
for your computer.
A
good
plan for
arranging your system
for
comfortable use is to
first
decide how you
want your
components
arranged,
then go
through the
process of
attaching the
pieces to
each other,
and
then to
the
power supply.
Arrange the
computer,
monitor, and disk
drive
to
your
satisfaction
on a
firm
level surface,
then follow the
instructions
below. Refer to
the
Owner’s
Manuals that
came with
your ATARI
Monitor and
Disk
Drive for more ideas
and
information on
setting up and
caring for
your
system.

Atari 520ST Specifications

General

Brand	Atari
Model	520ST
Category	Desktop
Language	English