1. The diagrams provided in this document are not intended to be used as advice of any kind
or a design for any construction or other purpose and must not be used or relied upon as such.
2. Information provided in this document relates only to installation of ATCO Gas Australia’s
infrastructure and does not relate to installation of other utility services.
3. The diagrams and drawings provided are not to scale.
4. Diagrams provided in this document cannot be used to ensure the stability, structural
integrity, support, durability, performance, drainage, safety, quality, adequacy, tness
for purpose or compliance with any law, standard or code of any wall, pillar or other
construction or its location, footings, foundations, protections, materials or any equipment,
ttings, wires, cabling, pipes, conduits or apparatus (including any gas meter box) used,
applied or installed in relation to any construction.
5. Due care and caution should be exercised by anyone working on or near walls, pillars and
other constructions. Safe work instructions and procedures should be followed at all times.
6. To the maximum extent allowed by law, no warranty or representation is given or made
concerning the diagrams provided in this document (including as to quality, completeness,
accuracy or tness for any purpose or that it complies with any applicable laws, standards
or codes).
7. You should conduct your own independent due diligence checks and verications and
obtain your own independent design and advice from relevant competent engineering
experts and other professionals (including to ensure the stability, structural integrity,
support, durability, performance, drainage, safety, quality, adequacy, tness for any
purpose and compliance with all relevant laws, standards and codes) for your own
constructions (including for any wall or pillar), their location, footings, foundations,
protections, materials and any equipment, ttings, wires, cabling, pipes, conduits or
apparatus (including any gas meter box) to be used, applied or installed in relation to
those constructions; and for the maintenance, upkeep, repair, monitoring and checking on
an ongoing basis of any such constructions.
8. To the maximum extent allowed by law, ATCO Gas Australia, its related bodies corporate
and ofcers, employees, agents or contractors are not liable in any way whatsoever
(including for negligence, recklessness or breach of any statutory duty) for any loss,
liability, cost or claim of any kind whatsoever (including any direct loss, indirect loss,
consequential loss, economic loss, loss of prot, loss of opportunity, death, illness, injury or
damage to reputation or goodwill) arising from or in relation to the use of or reliance on
diagrams in this document.
9. ATCO Gas Australia reserves the right at any time (without giving any notice) modify,
supplement or withdraw diagrams or any other part of this document.
10. In this document, ‘including’ means ‘including, but not limited to’. Reference to ‘this
diagram’ includes any part of it (including any information or drawing in it).
11. ATCO Gas Australia owns the copyright in the diagram referred to as Figure 24 and does
not give any license to copy or reproduce this diagram.
12. This Important Notice may not be altered, omitted, hidden or removed, except by ATCO
Gas Australia.
8. Disclaimer
39
To Next Page
Loading...
Need help?
General