2. Installation Responsibilities
This section provides information on the restrictions and conditions placed on gas meter
box locations. Graphics in Section 4.1 are provided to illustrate both correct and incorrect
installations.
2.1 Requirements of the Responsible Person
It is recommended that the Responsible Person complete the Gas Connection Checklist,
(refer to Appendix A).
It is the responsibility of the person requesting a gas service to ensure they are fully aware of
the following:
• The connection process as detailed in the Connection Process Handbook.
•
cient service connection that
meet the requirements provided within this document.
• Locate the gas meter box in conforming position.
• Provide information and plans for any known location of soak wells, reticulation pipes or
other services or below ground obstructions.
• Arrange any reinstatement inside the property line including associated costs.
• Provide authorisation approval for any excavation inside the property line required to
complete the gas connection, i.e., Notice of Acceptance or Gas Service Installation on Hold
Form, refer to Appendix B.
• Ensure line of service is free from hazards or obstructions (e.g., building material, protruding
building footings or vegetation) Ensure gas meter box is installed entirely within the
property boundary for the property requiring the gas connection, unless other written
arrangements have been accepted by AGA.
Following the installation of the gas service, a gas meter and
with a security disc located in the gas meter outlet. The consu
commission (introduce gas into) their supply piping downstream of the gas meter.
3
To Next Page
Loading...
Need help?
General