ATEQ F600 - User Adjustments; Options of the Menus

QSG_F600.415.00_EN_01 / 2019-04-16
31 / 38
User adjustments
OPTIONS OF THE MENUS
SPE CYCLE menu
Use this menu to carry out specific procedures necessary to ensure the proper operation
of specific measurement cycles.
none
Inf Fill
Piezo auto zero
SPECIAL CYCLE MENU
Label Special cycle Description of the cycle
none
None No special cycle selected
Inf Fill
Infinite fill Pressurize the part with a infinite fill time
Piezo auto zero
Piezo auto zero Auto zero cycle on the piezo sensor
N START
Number start cycle Launch a determined quantity of cycles
TO START SPECIAL CYCLES...
1. On the SPECIAL CYCLE MENU screen, select a
cycle, and press to validate.
2. Press Start to start the cycle.
3. To stop the current cycle press Reset .