ATEQ F600 - Specifications; Characteristics

QSG_F600.415.00_EN_01 / 2019-04-16
37 / 38
Specifications
CHARACTERISTICS
Technical characteristics of the device.
Main characteristics
Characteristics Values
Case dimensions: Height x Width x Depth 150 x 250 x 270 mm (5.91 x 9.84 x 10.63")
Overall dimensions 150 x 250 x 360 mm (5.91 x 9.84 x 14.17")
Format Half 19-inch rack
Mass About 8kg (17.6lbs)
Electrical power supply — 100/240VAC - 50W - 50/60Hz
— 24VDC-2A.
Overvoltage category II
Pneumatic air supply (0 to 0.5MPa (0 to 72.5PSI)
range)
Air supply: 0.6MPa (87PSI) ± 15%
Pneumatic air supply (0.6 to 1MPa (87 to
145PSI) range)
— Regulator input: 1.2MPa (174PSI)±10%
— Valves supply: 0.6MPa (87PSI) ±15%
Protection Device protection level IP2
Pneumatic connections: (inside / outside
diameters)
2.7/4 to 6/8mm
Operation temperature +5°C to + 45°C (+ 41°F to 113°F)
Storage temperature 0°C to +60°C (32°F to 140°F)
Operation altitude Up to 2000m (6500ft)
Relative humidity 80 % at 31°C (87°F) and 50% at 40°C (104°F)