User manual
2920 1456 03 31
Procedure
1. Starting from the Main screen (see section 4.2):
- press the key Menu (F1)
- press the ↓ key until the option Service is followed by a horizontal arrow
- press the tabulator key (2) to activate the menu
2. A screen similar to the one below appears:
Service Timer
Running Hours
→
hrs 7971
↓
Menu
F1 F2 F3
Fig. 16.1 Service menu
The screen shows that the total compressor running time is 7971 hrs.
3. Press the tabulator key (2):
Next Timer
Level A B C
hrs 8000
↓
Back Rset
F1 F2 F3
Fig. 16.2 Service menu
The screen shows that the next service plans to be carried out are plans A, B and C and that these
plans are to be carried out every 8000 running hours.
4. Press the ↓ key to find out which service plans were carried out previously:
Previous Timer
↑
Level A B
hrs 4008
Back
F1 F2 F3
Fig. 16.3 Service menu
The screen shows that service plans A and B were carried out at 4008 running hours.
To Next Page
Loading...
