User manual
2920 1456 03 20
13 Modifying service plans
Function
To modify the hour intervals for the Service plans.
Service plans
The service operations to be carried out are grouped in plans called Service plan A, B, C or D. When
reaching an interval, a message will appear on the screen indicating which Service plans are to be
carried out.
Important
Always consult Atlas Copco in case any timer setting should be changed. The intervals must not
exceed the periods below and must coincide logically.
Programmed service plan intervals
Service plans Intervals
Service plan A Every 4000 running hours
Service plan B Every 4000 running hours
Service plan C Every 8000 running hours
Service plan D Every 24000 running hours
Resulting service actions to be carried out
Service actions according to At
Service plan A and B 4000 running hours
Service plan A, B and C 8000 running hours
Service plan A and B 12000 running hours
Service plan A, B and C 16000 running hours
Service plan A, B, C and D 24000 running hours
… …
To Next Page
Loading...
