EasyManua.ls Logo

Atlas Copco PTS 916 Cd - Transporting Instructions; Lifting Instructions

Atlas Copco PTS 916 Cd
74 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
28 Preliminary
PTS 916 Cd
4.1.2 Transporting instructions
Road transport is only allowed on a trailer, with sufficient capacity
(wet weight of unit is 8260 kg (18213 lb)).
Before towing the unit on the trailer, block the towbar by locking
the blocking device (1) in downward position. The blocking device
has to be pulled up first, before it can be turned over.
Leave the towbar in blocked position on the trailer and secure the
unit (see section 4.1.1).
Lock blockage device in upward position when unit is manoeuvred
to its working location.
Lock all service doors.
4.1.3 Lifting instructions
To lift the unit, use a lift truck or crane with sufficient capacity (wet
weight of unit is 8260 kg (18213 lb).
Use the lifting positions of the unit as shown in the figure below.
See to it that the unit will be lifted vertically and remains level.
Release brake before towing.
!
1
Lifting acceleration and retardation must be kept
within safe limits (max. 4g).
Helicopter lifting is not allowed.
!

Table of Contents

Related product manuals