Atlas Copco STpad - Basic Maintenance; Cleaning the Device; Touch Screen; Returning the Device

Basic maintenance EN STpad
26
© Atlas Copco Industrial Technique AB - 9839 0882 01
Basic maintenance
Cleaning the device
WARNING Electric Shock
Should the product come in contact with electric circuits or other electrical power sources, there is a
risk of serious injury or death.
► Never work near electric circuits or other electrical power sources.
► Make sure there are no hidden electric circuits in your working area.
► Power off the product and disconnect it from the power supply before cleaning or maintaining it.
Housing
■
The housing of the STpad is best cleaned with a damp cloth.
■
Use compressed air, a high-pressure cleaner or vacuum cleaner may damage the surface.
■
Use a high-pressure cleaner, the additional risk of water entering the STpad may damage the elec-
tronics or touch screen.
Touch-screen
■
Use neutral detergent or isopropyl alcohol on a clean soft cloth to clean the panel surface.
■
Prevent using any kind of chemical solvent, acidic or alkali solution.
Returning the device
Please put the contents in the original package gently when you need to return the STpad.