Getting started EN STpad
12
© Atlas Copco Industrial Technique AB - 9839 0882 01
Installing the Micro SIM card
The device includes a micro SIM card slot for cellular and wireless connection. Only a micro SIM card is
supported in the slot.
Check with your network or cellular service provider for availability and cost rates.
1. Power off the STpad (for more information, see “Powering Off the Device”).
2. Open the left I/O compartment cover (for more information, see “Opening I/O compartment cover”).
3. Put the micro SIM slot in the left I/O parts.
Left view: Micro SIM Slot
1 Micro SIM Slot
4. Take the micro SIM card from its packaging.
5. The micro SIM card has a corner missing. Align the SIM card with the slot making sure that the cor-
ners match.
6. Insert the micro SIM card and press it in until an audible click sounds.
7. Close the left I/O compartment cover (for more information, see “Closing I/O compartment cover”).
See also
2 Powering Off the device [11]
2 Opening I/O compartment cover [16]
2 Closing I/O compartment cover [17]
Removing the Micro SIM card
1. Power off the STpad (for more information, see “Powering Off the Device”).
2. Open the left I/O compartment cover (for more information, see “Opening I/O compartment cover”).
To Next Page
Loading...