STpad EN Operation overview
© Atlas Copco Industrial Technique AB - 9839 0882 01
5
Front view
No. Item Description
1 Front camera 2.0 Mega-Pixels camera.
2 Touch screen 5-point capacitive touch.
3 Barcode trigger If barcode scanner is installed,
press to scan.
4 Battery LED Display battery status. For more in-
formation, see “LED Status”.
5 Wi-Fi LED The Wi-Fi LED lights to indicate Wi-
Fi is enabled.
6 FN LED The FN LED lights when the func-
tion switch on.
7 Home key Windows® 8 home key.
8 Volume + Volume increase.
9 Volume - Volume decrease.
10 Power key Power key powers the STpad on or
off.
11 Power LED The power LED lights when the de-
vice is on.
12 F2 key Programmable function key.
13 F1 key Programmable function key.
14 FN key Programmable function key.
See also
2 LED status [5]
LED status
Item Status Description
Power Green: On Power on
Off Power off
Battery Green: On Fully charged
Amber: On Charging
Amber: Blinking Low power < 15%
Off Not charging / no battery
FN Blue: On FN function switch on
Blue: Off FN function switch off
To Next Page
Loading...