STpad EN Getting started
© Atlas Copco Industrial Technique AB - 9839 0882 01
13
3. Put the micro SIM slot in the left I/O parts.
Left view: Micro SIM Slot
1 Micro SIM Slot
4. Press the micro SIM card in and release it. The card springs out.
5. Grasp the micro SIM card and remove it from the slot.
6. Close the left I/O compartment cover (for more information, see “Closing I/O compartment cover”).
See also
2 Powering Off the device [11]
2 Opening I/O compartment cover [16]
2 Closing I/O compartment cover [17]
Installing the Micro SD card
The device supports micro SD card for easier data storage.
1. Open the left I/O compartment cover (for more information, see “Opening I/O compartment cover”).
2. Put the micro SD slot in the left I\/O parts.
Left side: Micro SD Slot
1 Micro SD Slot
3. The micro SD card has a beveled edge. Align the micro SD card with the slot making sure that the
beveled edge of the micro SD card and the related slot match each other.
To Next Page
Loading...