Atlas Copco STpad - Touch Screen Features

Operation overview EN STpad
8
© Atlas Copco Industrial Technique AB - 9839 0882 01
No. Item Description
6 Expansion bay Remove the cover to find the ex-
pansion accessory connector.
7 Digitizer holder Place digitizer here.
Identifying the Digitizer
You can use the digitizer to control your STpad as with a mouse or keyboard.
The digitizer is not waterproof. Take care not to soak it or dip it in water.
1 Tip 2 Click button
Dimensions
The following image lists the device dimensions without add-ons (mm/inches).
Front view dimensions
Side view dimensions
Touch screen features
Always use the point of the digitizer for clicking or making strokes on the touch screen. Never use an
actual pen, pencil, or sharp/abrasive object on the touch screen.