STpad EN Operation overview
© Atlas Copco Industrial Technique AB - 9839 0882 01
9
The digitizer is used as if it were a pen or pencil. Touch the screen with the tip of the digitizer then remove
the digitizer from the screen.
After each use, replace the digitizer in the digitizer holder for proper care and to preserve the life of the
digitizer. Using a digitizer is similar to moving the mouse pointer then left-clicking icons on a desktop com-
puter screen.
The following actions are available through the use of the digitizer:
■
Open applications
■
Choose commands in menu
■
Select options in dialog box or drop-down menu
■
Drag the scroll bar
■
Drag across the text to select content
■
Place the cursor in a text box before typing
A digitizer replacement kit is available.
To prevent damage or malfunction, always dry the touch screen when wet.
Making right/left click
1. In the system tray, tap the mouse icon to make a right click.
2. After tapping, the mouse icon highlights the right button of the icon in red. The next touch screen tap
is treated as a right click.
3. The mouse icon returns to the left button highlighted in red so subsequent taps are treated as left
clicks.
To Next Page
Loading...