Atlas Copco STpad - Page 17

STpad EN Operation
© Atlas Copco Industrial Technique AB - 9839 0882 01
17
Closing I/O compartment cover
1. Put the device display side down on a clean work surface.
2. Put the I/O compartment cover.
Left view: Locating the I/O compartment cover
1 Left I/O compartment cover
Right view: Locating the I/O compartment cover
1 Right I/O compartment cover
3. Flip the I/O compartment cover and install.
4. Lock the latch (only available for the left I/O compartment cover).
Insert the I/O compartment cover correctly to prevent internal damage to the device.