Operation EN STpad
18
© Atlas Copco Industrial Technique AB - 9839 0882 01
Connecting to external cabling
To prevent damage to the device, connect all cabling and accessories before powering on the de-
vice.
Connecting USB cabling
The STpad has one USB port for connecting USB devices (for instance digital camera, scanner, printer,
modem, and mouse). The USB ports support USB 2.0 or USB 3.0 devices.
1. Open the left I/O compartment cover (for more information, see “Opening I/O compartment cover”).
2. Connect the USB device via USB cable.
See also
2 Opening I/O compartment cover [16]
Connecting Ethernet cabling
The STpad provides the Ethernet port for connecting Ethernet.
Use a shielded cable to maintain emissions and susceptibility compliance.
1. Open the left I/O compartment cover (for more information, see “Opening I/O compartment cover”).
2. Connect LAN cable to Ethernet port.
See also
2 Opening I/O compartment cover [16]
Connecting audio cabling
Sending sound through external audio devices such as speakers, headphones, or earphone using audio
connector, for higher audio quality.
1. Open the left I/O compartment cover (for more information, see “Opening I/O compartment cover”).
To Next Page
Loading...