Atlas Copco STpad - Page 19

STpad EN Operation
© Atlas Copco Industrial Technique AB - 9839 0882 01
19
2. Connect the audio cable.
See also
2 Opening I/O compartment cover [16]
Connecting Micro HDMI cabling
Connect to HDMI devices via micro HDMI cable.
1. Open the left I/O compartment cover (for more information, see “Opening I/O compartment cover”).
2. Connect micro HDMI cable to micro HDMI port.
See also
2 Opening I/O compartment cover [16]
Connecting RS-232 cabling
Connect to RS-232 devices with an RS-232 cable.
1. Open the right I/O compartment cover (for more information, see “Opening I/O compartment cover”).
2. Align the RS-232 cable with the port in the device and connect it.
3. Turn the locking screws on the cable to secure it to the device.
See also
2 Opening I/O compartment cover [16]