Atlas Copco STpad - Page 20

Operation EN STpad
20
© Atlas Copco Industrial Technique AB - 9839 0882 01
Handstrap, Carrying Handle and Shoulder Strap
The STpad is equipped with a handstrap, a carrying handle and a shoulder strap for convenience and
choice. Select the necessary accessory according to customer needs. Install the handstrap either with
shoulder strap or carrying handle. However, the handle and shoulder strap cannot be installed together
due to space constraints.
For more information, see “Connecting the Handstrap”, “Connecting the Carrying Handle” and “Connect-
ing the Shoulder Strap”.
See also
2 Connecting the Handstrap [20]
2 Connecting the Carrying Handle [22]
2 Connecting the Shoulder Strap [22]
Connecting the Handstrap
1. Remove the screws securing the bumpers.
2. Install the D-rings.
Make sure that the D-rings are tightly secured before installing the handstrap.