Errors During Measurement 71
Atlas Cyclops
Errors During Measurem ent
12.1 Data transmission/reception error from
3D cameras / failed target identifi cation.
During data transmission/reception between 3D cameras and cabin, the
following page may be displayed:
Figure 6 1
This may mean that there is a transmission/reception failure due to one or
several of the following problems:
• Failure or radio interference in the transmission system with 3D cameras.
• 3D camera/s is/are broken or off.
NO communication
If one or both symbols are GREY, it means that there is
a transmission/reception failure.
Communication OK
Check that the Bluetooth communication of 3D cameras
becomes active (both symbols should be BLUE).
Symbols indicating
the Bluetooth
communication
status of LH and RH
To Next Page
Loading...
Need help?
General
