16
Notes for your safety
• You can only disconnect the device from the power supply by pulling out the
power cable.
• Position the device in such a way that you can easily disconnect it from the PC/
laptop at any time.
• Never touch the power plug or power cable with wet hands.
• Use only original accessories and original spare parts from ATMOS.
• Follow the instructions regarding periodic tests (see chapter “6.1 Periodic tests”
on page 40).
• Assembly, new settings, modications, extensions, and repairs may only be
carried out by authorized persons.
• Do not modify the device without the manufacturer’s permission.
• During prolonged use of the ATMOS Scope, the distal endoscope tip can heat up
to 53.5 °C.
• Never leave the patient unattended near the device.
Keep the device fully functional at all times.
Malfunctions could cause injury to you and your patients.
• Please observe the notes on the electromagnetic compatibility (EMC) of the
device.
• ATMOS recommends: Only use original ATMOS software.
To Next Page
Loading...
