Atmos Scope - Selecting process chemicals

32
Reprocessing
ATMOS Scope with USB cable
and USB protection cap
X X X X X X
5.3.2 Selecting process chemicals
Material compatibility tests using the following cleaning agents and disinfectants
were carried out for the ATMOS Scope. Please follow the instructions specied by the
manufacturer of the cleaning agents and disinfectants, particularly with regard to
concentrations, temperature, duration of use, and contact times as well as protective
measures.
Cleaning agent
(manufacturer)
Active ingredients in 100 g (if published or released
by the manufacturer)
Type
Cleaning agents – manual reprocessing
MetriSponge, Metrex Water and nonhazardous ingredients 30–60 %
Propylene glycol 10–30 %
Nonionic surfactants 10–20 %
Fragrance oil 5–10 %
Proteinase subtilisin 0.1–1 %
Octamethylcyclotetrasiloxane <0.2 %
Ready-to-use