23
Setting up and starting up
& The leakage tester must not be immersed in water and may only be cleaned by
wipe disinfection.
& Never connect or disconnect the leakage tester from the endoscope under
water.
& Never immerse the endoscope in liquid if there is a pressure drop.
Testing the defl ection mechanism
• Slowly operate the de ection lever to check the function.
CAUTION
• Limitations in de ection can indicate an endoscope defect. In order to avoid
major damage to the endoscope, only use the endoscope if the de ection works
smoothly and without limitation.
To Next Page
Loading...
