ATOMSTACK A6 PRO - Engraving Page Controls; System Language Setting

1%
2.Oine Basic Function Introduction
3. System language setting
2.4 Click the engraving button to enter the engraving page
1)Display the name of the engraving le and the percentage of completion
2)Pause button
3)Stop engraving button
4)Adjust the step size for power coecient and speed coecient
5)Power coecient adjustment and display area
6)Speed coecient adjustment and display area
In the settings page, select system language. This version suppos Chinese, English, French, German, Italian, Spanish, and Russian.
1
3 4
5
6
2
3