Atrust t68WD - Configuring the Access Privileges and Password of Atrust Client Setup

Conguring Client Settings
Conguring System Settings
37
4.2.3 Conguring the Access Privileges and Password of Atrust Client Setup
You can congure the access privileges of Atrust Client Setup for client users by the Password setting.
To set access privileges and password, please do the following:
NOTE
• System administrators (and only administrators) are allowed to access Atrust
Client Setup by default. If you don’t set a password here, the administrator
privileges are sucient to access Atrust Client Setup. If authentication is enabled
and the password is set, administrators will need that password to enter Atrust
Client Setup.
1. On Atrust Client Setup, click System > Password.
2. Under the Security section, click to check Require a password to access Atrust Client Setup. A window
appears for you to set the password.
3. Type in the desired password, and then click Save to apply.
4. Click Save to store all the changes.