1
2
3
5
4
6
7
Wear condion of replacement parts will vary according to different use
condions such as weight, frequency of use, average speed and incline. Wear
condion of operang panel depends on the frequency of press. Buons that are
frequently used will wear first. Under normal use condions, the lifeme of
replacement parts will be 1~2 years. Wear of supplies may cause irregular
operaon such as noise and slipping belt. Please contact the distributor or the
technician and have them to determine the cause. DO NOT disassemble the
machine by yourself as it may lead to the misjudgment of technician.
Belt
Cushion
Film panel(small)
Drive belt
Film panel(main)
Film panel(side)
Deck
Refer to the exploded parts diagram (P.10~15) if you noce any
Refer to the exploded parts diagram (P.10~15) if you noce any
part is missing and inform the distributor or the technician the
part is missing and inform the distributor or the technician the
corresponding number. The technician will determine if the
corresponding number. The technician will determine if the
user can replace with another part and assemble on his/her
user can replace with another part and assemble on his/her
own. Please contact technician if you don’t know how to
own. Please contact technician if you don’t know how to
assemble the missing part. DO NOT disassemble the treadmill
assemble the missing part. DO NOT disassemble the treadmill
to conduct parts assembly or maintenance as the technician
to conduct parts assembly or maintenance as the technician
may misjudge the problem or the machine may not reach
may misjudge the problem or the machine may not reach
complete fixaon and lead to personnel injury.
complete fixaon and lead to personnel injury.
To Next Page