ALL
3
The power socket of this product contains a grounding conductor. This socket must be inserted into the outlet via the power cord with grounding latch. The plug must
be plugged into an appropriate outlet that is properly installed and grounded in accordance with local codes and ordinances.
This product uses a rated voltage of 220V or 110V and comes with a three-pin power cord as shown in the following illustraon.
If the grounding outlet is not available, please use grounding adapter to connect this plug to the two-pin outlet. Please have qualified electrician install the
grounding outlet correctly before using the adapter. Please connect the grip or similar adapter extension to the ground and fix with the metal screw whenever
the adapter is used. Refer to the following illustraon.
Do determine the power cord is electrically related for 220V or 110V by checking the specificaon label or specificaon in the manual (P.41~43). Please make
sure the cord is connected to the plug with correct voltage. DO not use the power cord via adapter or extension cord to avoid of any component damage or
personnel injury caused by sudden voltage changes such as voltage surges and spikes.
Power cable
Three-pin outlet
Power cable
Grounding adapter
Metal grounding screw
Two-pin outlet
The above illustraons only show three-pin power code power cord and outlet or two-pin outlet and grounding adapter. The type of three
To Next Page
Loading...