Attacus AT-200 - Opera Ng Panel

ALL
21
1) Digital screen: displays informaon such as the workout me, distance, calorie, heart rate, step, slope and speed (Refer to “Digital screen” on P.22~25).
2) START: press this buon to start your workout, or start the exercise aer selecng the program. Press to restart the exercise aer the pause.
3) STOP: press this buon to pause and press it again to stop the exercise and collect the data. Press this buon to return to the previous program when seng
program value.
4) Quick speed buon: quickly switch different speed values including warm-up and fast run.
5) Quick incline buon: quickly switch different slope angles including warm-up and workout.
6) SPEED UP/DOWN: adjust the speed (unit=0.1). It can also help you to enter quickly when seng program value.
7) INCLINE UP/DOWN: gradually increase or decrease the slope (level unit=0.5, AT200-10%,20Level,AT300.400-12%,24Level). It can also help you to enter quickly
when seng program value.
8) ENTER: press this buon to proceed to the input of next data when seng program value.
9) Bluetooth display/pairing: short press to switch the heart reat value of the paired device and pair with smart device APP. Press this buon long to pair any
wearable device.
10) ANT+ display/pairing: click this buon can switch the heart rate of paired device. Long press this buon to pair any wearable device.
11) Fan switch: turn on/off the fan.
12) Audio Jack (AUX IN): connect your media player to the treadmill with the audio signal wire.
13) Basic/Advanced/Interval/HRC/Goal/Custom: sports mode selecon keys, direct switching, (item AT200-20, AT300-25, AT400-27) for exercise mode selecon and
setup.
14) Exercise data display: exercise data switch; there are 4 types of data available, including Pace/steps(Step1)/step frequency(Step2)/current length(Step3),
distance/slope, total calorie/calorie per hour and heart rate.
15) Safety key: you can turn on and operate the treadmill aer the switch is inserted. The machine is in emergency mode when the safety key is not inserted and no
operaon will be allowed.
Please remove the transparent protecve film on the operang panel before use.
Operaon Panel
You can choose to display your workout data by pressing “PACE/STEP” buon. “Pace” shows target speed in minutes per mile (or kilometer),
You can choose to display your workout data by pressing “PACE/STEP” buon. “Pace” shows target speed in minutes per mile (or kilometer),
“Step 1” shows steps, “Step 2” shows step frequency per minutes, or “Step 3” shows your current length, total 4 workout data.
“Step 1” shows steps, “Step 2” shows step frequency per minutes, or “Step 3” shows your current length, total 4 workout data.