ALL
40
1) Please wipe the treadmill, motor safety guard, console and display console set with clean cloth. DO NOT use any detergent.
2) Check if the power cord is damaged. Please contact the distributor or Alatech customer service for any damage.
3) Make sure the power cord is not pressed by the machine or jammed anywhere.
4) Check if there is any stain that can affect operaon on the belt.
5) Check belt tension. Make sure the uncalibrated belt will not damage other components.
1) Upright the treadmill and check if the pin of hydraulic li can be securely locked.
2) Move the machine and clean the dust and stain underneath the treadmill. Move the machine back aer cleaning.
1) Make sure all screws are securely locked.
2) Upright the treadmill and check if there is any loose or missing component.
1) Please lubricate the pin of hydraulic li, the sha of iron pieces, deck and belt every year to ensure normal operaon.
Keep the treadmill and surroundings clean can effecvely decrease maintenance issues. We recommend
users to abide by following prevenve maintenance procedure. Please make sure the power of treadmill
is off and the power cord is unplugged for any maintenance.
Please make sure the power of treadmill is off and the power cord is unplugged for any maintenance. Please contact the distributor or
To Next Page