Attacus AT-200 - Page 41

ALL
39
Please correctly wear the heart rate monitor(oponal accessories) according following steps. The posion and ghtness will influence the accuracy of
detecon:
1) Adjust the strap length to fit ghtly but comfortably around your chest and avoid any slide during workout.
2) Make sure the fastener of heart rate monitor sensor is securely fastened.
3) Wet the electronic sensing area with clean water.
4) Wear your monitor under your chest.
5) Make sure the monitor is worn in right direcon. The logo must be at exact center of your chest to ensure successful and accurate detecon.
Please follow the above-menoned steps to wear the heart rate monitor correctly and achieve the most accurate detecon during workout.
Please follow the above-menoned steps to wear the heart rate monitor correctly and achieve the most accurate detecon during workout.
The heart rate monitor is an assisve devices instead of a medical equipment. Please select the appropriate exercise intensity according to
The heart rate monitor is an assisve devices instead of a medical equipment. Please select the appropriate exercise intensity according to
your physical condion.
your physical condion.
Troubleshoong of The Heart Rate
Wearable connecon
Fluorescent lamps, computers or large motors may interfere the detecon and lead to inaccurate heart rate reading:
1)Your heart rate reading may be unstable under following condions:
•The holds to heart rate sensor bar are too ght. Please hold the heart rate sensor bar with appropriate stress.
•Moon and vibraon caused by connuous hold to the heart rate sensor bar during the workout.
•Users with heavy breathing during the workout or thick skin on the palms.
•Wearing accessories like rings during the workout can lead to inaccurate detecon.
•Dry, moist or cold hands can influence the accuracy of detecon. It is recommended to keep moderate moisture on your hands and rub your hands for
keeping warm.
•Users with serious asthma, or atherosclerosis or peripheral arterial occlusive disease.
2)Unstable heart rate reading or the machine fails to display heart rate on the console display overview :
•Please make sure your skin have contact with the heart rate monitor. We recommend to wet the sensing area with clean water and try pairing again aer
wearing.
•Make sure the fastener of heart rate monitor sensor is securely fastened.
•Make sure the distance between the device and the receiver (on the upper right of onsole display overview) is within 300cm (118 in).
•Make sure the baery of heart rate monitor sensor is fully charged.
•Dry sensing area or loose strap of the heart rate monitor can effect detecon. It is necessary to maintain moderate moisture on the sensing area. Please
also make sure the strap fits your chest ghtly but comfortably.
Troubleshoong