– Unscrew plug -arrow- for inspection and filler hole on right side
of gearbox housing using socket Torx T60 - T40087- .
• Gear oil level (MTF) must be 2 mm below bottom lip of filler
and inspection hole.
– If oil level is not correct, fill up with gear oil ⇒ page 87 .
Tightening torques
♦ Screw plug ⇒ “6.1 Overview - gear oil circuit”, page 77
♦ ⇒ Running gear, axles, steering; Rep. gr. 40 ; Subframe; Ex‐
ploded view - subframe
♦ ⇒ General body repairs, exterior; Rep. gr. 66 ; Noise insula‐
tion; Exploded view - noise insulation
8.2 Draining and filling gear oil
Note
♦
The 7-speed dual clutch gearbox has an ATF section and an
MTF section.
♦
The ATF is in the blue section of the gearbox and can be
drained off via the ATF drain plug -1- and added via the ATF
filler plug -2- ⇒ “9 ATF”, page 91 .
♦
The MTF is in the green section of the gearbox and can be
drained off by removing the MTF pump -4- and added via the
MTF inspection plug -3-
⇒ “8.2 Draining and filling gear oil”, page 87 .
♦
The bolt securing the gear cluster -arrow- is not a drain plug!
Special tools and workshop equipment required
♦ Used oil collection and extraction unit - VAS 6622A-
Audi A4 2015 ➤ , Audi A4 Avant 2015 ➤ , Audi A4 China 2016 ➤ , Audi A4 a ...
7-speed dual clutch gearbox 0CJ, 0CK, 0CL, 0DN, 0DP - Edition 08.2018
8. Gear oil 87
To Next Page
Loading...
Need help?
General
