Audi A8 1994 - Interrogate Fault Memory

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
03 Final control diagnosis 126
04 Basic setting -
05 Erase fault memory 128
06 End output 129
07 Code control unit 130
08 Read measured value block 132
09 Read individual measured value -
10 Adaption 136
11 Login procedure -
4.4 - Interrogate fault memory
Note:
Fault information displayed is not updated constantly, but rather only on starting self-diagnosis/implementing
function 05 "Erase fault memory".
- Start automatic parking system self-diagnosis => Page 118 .
-> Readout on VAS 5051:
- From list -1- select diagnostic function "02 - Interrogate fault memory".
-> Readout on VAS 5051:
1 - Content of fault memory:
- 0 faults detected
Or
- X faults detected
2 - Fault
Audi A8 1994 ➤
Electrical system Self-diagnosis 02.99 ➤ - Edition 05.2002
120 01 - Self-diagnosis