Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
-> Readout on VAS 5051:
1 - Channel X
Value X saved
- Terminate function "10 - Adaption" by touching ◂ key.
1.12 - Adaption channels 02 to 09
Adaption channel 02 - Resetting service display following service
Notes:
◆ The service display is designed to remind drivers that service is due. The display appears in the centre
display.
◆ The service prompt appears as of 1 month/2000 km before reaching service limit.
Display example: "SERVICE IN 1300 KM" is displayed after a total distance of 13700 km.
◆ The remaining mileage prior to service can be called up by way of the menu in the centre display by pressing
the clock adjuster button once.
◆ If service is due, message appears on centre display for 5 seconds when ignition is switched on.
It is displayed after the automatic gearbox info and after entering destination for navigation system where
appropriate. Display: "SERVICE!"
◆ Information on applicable specifications:
=> Maintenance
◆ Channels 40, 41, 46, 47 and 48, which display dynamic service values, are set automatically to "0".
-> Readout on VAS 5051:
1 - Enter channel number
- Use keypad -2- to enter "02" for "Adaption channel 02" and confirm by touching Q key.
Audi A8 1994 ➤
Electrical system Self-diagnosis 02.99 ➤ - Edition 05.2002
34 01 - Self-diagnosis
To Next Page
Loading...
