Audi A8 1994 - Adaption

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Measured value block 140
Read measured value block 140
⇒
◂ Indicated on display
Radio 1 Telephone 1 Navigat 1 Telemat 1
Telematics display zone for display data bus interface
▪ 1 - Signifies that telematics control unit is a display data bus
user
▪ Empty display zone signifies that telematics control unit is not
a display data bus user
Navigation display zone for display data bus interface
▪ 1 - Signifies that navigation control unit is a display data bus user
▪ Empty display zone signifies that navigation control unit is not a display
data bus user
Telephone display zone for display data bus interface
▪ 1 - Signifies that telephone control unit is a display data bus user
▪ Empty display zone signifies that telephone control unit is not a display data bus
user
Radio display zone for display data bus interface
▪ 1 - Signifies that radio control unit is a display data bus user
▪ Empty display zone signifies that radio control unit is not a display data bus user
Measured value block 141
Read measured value block 141
⇒
◂ Indicated on display
Text
Display data bus mode
1.11 - Adaption
The individual functions are called up by way of the appropriate adaption channel number (=> Adaption table,
Page 29 ).
The current dash panel insert adaption values can be read out in measured value blocks 010...016 and 019.
Adaption channel Measured value block
03 011, Page 24
19 019, Page 26
30 010, Page 23
40 and 41 012, Page 24
42 and 43 013, Page 24
44 014, Page 25
45 and 46 015, Page 25
Audi A8 1994 ➤
Electrical system Self-diagnosis 02.99 ➤ - Edition 05.2002
28 01 - Self-diagnosis