Audi A8 1994 - With Respect to the Correctness of Information in this Document. Copyright by AUDI AG

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Drive train data bus control units Adaption value
Engine and dash panel insert with im‐
mobilizer III
1025
Engine, air conditioner and dash panel
insert with immobilizer III
1033
Engine, automatic gearbox, air condi‐
tioner and dash panel insert with im‐
mobilizer III
1035
- Change adaption value by means of direct entry => "B - Changing adaption value by means of direct entry",
Page 32 .
- Enter 5-digit adaption value. Use "0" to fill up blanks.
Example:
Desired input: 1025 with immobilizer III
Keypad entry: 01025
-> Readout on VAS 5051 following adaption:
Example:
1 - Channel 60
Value 1025 saved
- Terminate function "10 - Adaption" by touching ◂ key.
Adaption channel 61 - control units using convenience system data bus
This function can be used to enter control units using convenience system data bus on dash panel insert
replacement.
Audi A8 1994 ➤
Electrical system Self-diagnosis 02.99 ➤ - Edition 05.2002
1.15 - Adaption channels 60 to 62 63