Audi A8 1994 - Read Measured Value Block

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
-> Readout on VAS 5051:
1 - Vehicle system coding completed
2 - Control unit identification with new code
(old code in brackets)
- Terminate function "07 - Coding control unit" by touching ◂ key.
5.11 - Read measured value block
Sequence of operations
- Start automatic headlight range control self-diagnosis
=> Page 146 .
-> Readout on VAS 5051:
- From list -1- select diagnostic function "08 - Read measured value block".
-> Readout on VAS 5051:
1 - Enter display group
- Use keypad -2- to enter required three-digit display group number=>List of display groups, Page 160 and
confirm entry by touching Q key.
Audi A8 1994 ➤
Electrical system Self-diagnosis 02.99 ➤ - Edition 05.2002
5.10 - Code control unit 159