Audi A8 1994 - Page 31

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Measured value block 125
Read measured value block 125
⇒
◂ Indicated on display
Engine 1 Gearbox 1 - -
Automatic gearbox control unit - drive train data bus interface
▪ 1 - Control unit is drive train data bus user
▪ 0 - Control unit with CAN capability is not drive train data bus user
▪ No readout - no control unit CAN capability
Engine control unit - drive train data bus interface
▪ 1 - Control unit is drive train data bus user
▪ 0 - Control unit with CAN capability is not drive train data bus user
▪ No readout - no control unit CAN capability
Measured value block 130
Read measured value block 130
⇒
◂ Indicated on display
Tyre pr. 1
Tyre pressure display zone for Group convenience system data bus interface
▪ 1 - Signifies that the tyre pressure control unit is a Group convenience system data bus
user
▪ Empty display zone signifies that tyre pressure control unit is not a Group convenience
system data bus user
Measured value block 131
Read measured value block 131
⇒
◂ Indicated on display
AC 1 Text
Convenience system data bus mode-
Air conditioner display zone for Group convenience system data bus inter‐
face
▪ 1 - Signifies that the air conditioner control unit is a Group convenience
system data bus user
▪ Empty display zone signifies that air conditioner control unit is not a Group
convenience system data bus user
Audi A8 1994 ➤
Electrical system Self-diagnosis 02.99 ➤ - Edition 05.2002
1.10 - Read measured value block 27