Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
-> Readout on VAS 5051:
1 - Channel 2
Read and test
4 - Slide bar positioned on current adaption value
Display Significance
0 Service not due
1 Service due
Service status is reset by way of the following adaption value:
Adaption value Service status
00000 Cancel service
- Use slide bar to change adaption value =>"A - Changing adaption value with slide bar", Page 31 .
Or
- Change adaption value by means of direct entry => "B - Changing adaption value by means of direct entry",
Page 32 .
-> Readout on VAS 5051 following adaption:
1 - Channel 2
Value 0 saved
Notes:
◆ "SERVICE IN 15000 KM" is displayed in dash panel insert.
◆ 15000 km is the initial value for the service display. Conversion to higher mileage (e.g. 30000 km for petrol
engines) is performed during vehicle operation.
- Check service specifications in measured value blocks 013...016
=> Page 24 onwards.
Audi A8 1994 ➤
Electrical system Self-diagnosis 02.99 ➤ - Edition 05.2002
1.12 - Adaption channels 02 to 09 35
To Next Page
Loading...
