Audi A8 1994 - Page 165

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Display group number Indicated on display
002 1
2
3
4
=
=
=
=
Front level sender
Rear level sender
Positioning motor specifi‐
cation in %
Time constant in s
Vehicles with static automatic headlight range control
Display group 001
Read measured value block 1
⇒
◂ Indicated on display
X.XXX V X.XXX V XXX km/h
Vacant
Vehicle speed
▪ 0 ... 300 km/h
Dipped beam voltage via term. 56b
▪ 0 ... 15 V
Voltage supply term. 15
▪ 0 ... 15 V
Display group 002
Read measured value block 2
⇒
◂ Indicated on display
X.XXX V X.XXX V ADP OK
Vacant
Positioning motor actuation
▪ ADP. in progress (positioning motor actuation provides compensation for
deviation)
▪ ADP. OK (default position set)
Rear level sender voltage value
▪ 0.5 ... 4.5 V
Front level sender voltage value
▪ 0.5 ... 4.5 V
Vehicles with dynamic automatic headlight range control
Display group 001
Read measured value block 1
⇒
◂ Indicated on display
X.XXX V X XXX km/h X.XX m/s2
Acceleration
▪ 0 ... 7.00 m/s2
Vehicle speed
▪ 0 ... 300 km/h
Light switch
▪ 0 = Lights off
▪ 1 = Lights on
Audi A8 1994 ➤
Electrical system Self-diagnosis 02.99 ➤ - Edition 05.2002
5.11 - Read measured value block 161