In strument s a nd warning / indicator lights 25
caused by t he heat being radiated from
the engine.
- You can select the units used for temper-
atu re, speed and othe r measurements in
the MML
- For inf orma t ion on the audio/video and
navigation* functions, refer to the sepa-
rate MMI owner's manual.
Operation
The driver information system is operated us-
ing the buttons on the multifunction steering
wheel.
gi
g
~------,i
~
Fig. 6 Mult ifu nction steering wheel: operat ing t he d riv-
er informat ion system
Fig. 7 Driver informat ion system: opening the vehicle
funct ions menu
Operating concept
.. Switch the ign ition on.
.. To switch between t he tabs, press th e rocker
switch @ to the left or right
c> fig. 6.
.. To access additional informat ion below or
above, rotat e the thumbwheel @ dow n or
up.
.. To confi rm a selection, press t he t humb-
wheel @ .
Accessing Vehicle functions
.. Select t he first t ab with the rocker swit ch
@.
.. Press the button [jg]_ The Vehicle funct ions
menu appears c> fig. 7.
.. To select a menu item , tu rn and press t he
thumbwhee l @ .
Resetting values to ze ro
.. Select t he on-board computer/ Efficiency
program
menu item in the Vehicle func-
tions
men u.
.. You can now select between t he long-term
memory and short-term memory .
.. To reset the values in a memory, press and
hold t he thumbwheel @ f or one second.
The last function selected displays when you
switc h the ig nition on.
On-board computer
You can call up t he followin g information in
the on-board computer:
- Date
- Driving t ime (h) from t he short -te rm memo-
ry
- Average consumption in MPG (l/100 km)
from the short-te rm memory
- Average speed in mph (km/h) from the
short-te rm memory
- Distance driven in miles (km) from t he
short-te rm memory
- Current fue l consumption in MPG (l/100
km)
- Short-term memory overview
- Long-term memory overview
The short-te rm memory collects driv ing infor-
mation from the time the ign ition is switc hed
on until it is switched off. If you continue driv-
ing within two hours after switch ing the igni-
tion off, the new values are included when cal-
culating the current tr ip information .
Unli ke the short -term memory, the long-term
memory is not erased automatically. You can
select the time period for evaluating t rip in-
format ion yourse lf .
To Next Page
Loading...
