Stylus pressure adjustment range 0 to 3.0 g
Applicable cartridge weight range (including
headshell)
12 to 17 g
Cartridge and headshell specifications
Cartridge Model AT-LPW40WN: AT-VM95E AT-LPW30TK: AT-VM95C
Cartridge Type VM
Recommended load impedance 47,000 ohms
Output voltage 4.0 mV (mV at 1 kHz, 5 cm/sec)
Stylus
AT-LPW40WN: 0.3 × 0.7 mil bonded elliptical stylus AT
-LPW30TK: 0.6 mil bonded conical stylus
Cantilever Aluminum pipe
Tracking force range 1.8 to 2.2 g (standard 2.0 g)
Cartridge weight 6.1 g (0.22 oz)
Headshell model AT-HS4
Headshell weight 8.5 g (excluding lead wires)
Headshell overhang adjustment ± 5 mm
To Next Page
Loading...
