AudioCodes C448HD - Performing Administrator-Related Operations; Setting up an E911 Emergency Location Using TAC

CHAPTER6 Performing Administrator-Related Operations
C448HD C450HD | Users & Administrator's Manual
6 Performing Administrator-Related Operations
Networkadministratorscan:
Updatephonefirmwaremanually(seeUpdatingPhoneFirmwareManuallyonpage86
Manuallyperformrecoveryoperations(seeManuallyPerformingRecoveryOperationson
page89
RemovedevicesfromIntunemanagement(seeRemovingDevicesfromIntuneManagementon
page90
UpdateMicrosoftTeamsdevicesremotely(seeUpdatingMicrosoftTeamsDevicesRemotelyon
page98
ManagephoneswiththeDeviceManager(seeManagingPhoneswiththeDeviceManageron
page98
Setting up an E911 Emergency Location using TAC
AnE911emergencylocationcanbesetupusingtheMicrosoftTeamsadmincenter.
➢ To set up an E911 emergency location:
1. IntheTAC,gotoLocationsandinthe'Emergencyaddresses'page,setanewlocationby
clicking+Add.
2. Enteranameforthelocation,enableinsert address manually,makesurethatalldatais
filledincorrectlyandthenclickSave.
- 80 -