User's and Administrator's Manual 3. Starting up
Version 0.314 19 450HD IP Phone
3 Starting up
After connecting the phone to the network (or resetting it), a start-up wizard opens displaying by
default the ‘Select the language for your device’ screen.
Configure the language of your choice and then configure device settings to match specific
requirements. Only if the phone is restored to default settings will it be necessary to repeat this.
3.1 Configuring Device Settings
The section familiarizes you with the device’s settings. Devices are delivered to customers
configured with their default settings. Customers can customize these settings to suit enterprise
requirements.
To access device settings:
1. In the phone’s idle screen, touch the menu, touch Settings and then Device Settings.
Alternatively, press the hard MENU key on the phone.
To Next Page
Loading...
