AudioCodes C450HD - Changing Presence Status; Figure 4-7: Phone Screen in Idle State - Menu Items; Table 4-2: Menu Item Descriptions

450HD IP Phone
User's and Administrator's Manual 34 Document #: LTRT-13263
Figure 4-7: Phone Screen in Idle State - Menu Items
Use the table below as reference:
Table 4-2: Menu Item Descriptions
Item Description
Presence status See Section 4.1.2 for more information.
Settings See Section 4.2 for more information.
Sign Out See Section 4.6 for more information.
4.1.2 Changing Presence Status
You can assign a presence status to control whether you want people to contact you or not. By
default, your status is based on your Teams server.
Note:
• After n minutes (configured in the Teams server by your administrator), presence status
automatically changes to ‘Inactive’.
• n minutes after this (also configured in the Teams server by your administrator), presence
status automatically changes to ‘Away’; all calls are then automatically forwarded to the
RGS (Response Group Service) if it is configured.
From the drop-down list in the phone’s idle screen, select the status you require.