450HD IP Phone
User's and Administrator's Manual 28 Document #: LTRT-13263
2. After the restore, the phone automatically reboots and goes through the Wizard and sign-in
process.
3. Touch OK; the sign-in screen is displayed (see Section 4.1 for more information).
3.2.2 Performing a Soft Restore
Users must log in as Administrator in order to perform a soft restore. The soft restore is then
performed in the ‘Debug’ screen.
To perform a soft restore:
1. Press the MENU key on the phone and in the Settings screen that opens, scroll down
and touch the Admin option.
2. Touch the Login menu item.
3. Touch the field for the virtual keyboard to be displayed and then enter the default
password of 1234; you’re prompted with ‘You are now logged in’; you now have
privileges to configure the Device Settings screen.
4. Press the x key on the phone to go back and then in the (device) Settings screen, select
the Debug option.
To Next Page
Loading...
