450HD IP Phone
User's and Administrator's Manual 36 Document #: LTRT-13263
4.2 Configuring Teams Application Settings
This section describes Teams application settings. In the Calls screen, touch the phone menu
and from the menu screen shown in Figure 4-7, select the Settings item.
Figure 4-8: Settings
Use the table below as reference:
Table 4-4: Idle Screen Description
Item Description
Calls Opens the Calls screen.
Incoming Calls
• Call forwarding. Enables automatically redirecting an incoming call to another
destination.
• Forward to. Only displayed if the previous setting is enabled. Defines the
destination to which to forward incoming calls.
• Also ring. Only displayed if ‘Call forwarding’ is disabled. Select either Off, Contact
or number, or Call group.
• If unanswered. Only displayed if ‘Call forwarding’ is disabled. Defines the
destination to which to forward unanswered incoming calls. Select either Off,
Voicemail, Contact or number, or Call group.
Caller ID
• Hide your phone number when dialing people who are outside of Microsoft Teams
Block Calls
•
Block calls with no caller ID. Enables blocking calls that do not have a Caller ID.
Help
Opens the ‘Microsoft Teams help center’ screen.
To Next Page
Loading...
