AudioCodes C450HD - Page 26

450HD IP Phone
User's and Administrator's Manual 26 Document #: LTRT-13263
• IP Address [Read Only]
• IP Settings [DHCP or Static IP]
• Network state [Read Only]
•
Enable PC port
Debugging
Allows the Admin user to perform debugging for troubleshooting purposes. Available after logging
in as Admin.
• Log settings
• Remote Logging (see under Section 7.2.2 for more information)
• Reset configuration
• Restart Teams app
• Company portal login
• Debug Recording (for Media/DSP debugging) (see under Section 7.2.2 for more information)
• Switch to Skype for Business
• Factory data reset (the equivalent of restore to defaults; including logout and device reboot).
• ADB (Android Debug Bridge command-line tool used to debug the Teams app); the setting is